1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Dana T18 transfer case

Discussion in 'General Jeep Discussion' started by DannyH, Aug 28, 2017.

  1. Aug 28, 2017 at 4:52 PM
    #1
    DannyH

    DannyH [OP] Member

    Joined:
    Jul 12, 2017
    Member:
    #1673
    Messages:
    8
    Gender:
    Male
    Vehicle:
    95 YJ
    6" lift, 33x12.50x15 A/C
    I have a twin stick Dana T18 transfer case and I'm trying to figure out what it's worth?
    Any idea?
     
  2. Aug 28, 2017 at 5:43 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Pictures would help. Any idea of the miles on it?
     
    JKBob 25 likes this.
  3. Aug 28, 2017 at 10:57 PM
    #3
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    Not much to me, but somebody else maybe. Really limited on what it can be used in. Cool thing about them is that you can run a PTO winch off of them. I paid $80 for my last Dana 300 (3rd gen dana18) in unknown condition and it came with a twin stick. Changed the fluids and replaced the seals and all was good.
     
  4. Aug 29, 2017 at 10:53 AM
    #4
    DannyH

    DannyH [OP] Member

    Joined:
    Jul 12, 2017
    Member:
    #1673
    Messages:
    8
    Gender:
    Male
    Vehicle:
    95 YJ
    6" lift, 33x12.50x15 A/C
    Well I've been searching the web and if offgrid found a transfer for $80 then he got a smoking deal. I wouldn't let this transfer go for $80 I'm not sure why you say really limited in what it can be used on. Really? Novak makes all kinds of adapters and I was told that the T18 was a well built unit and it was used in several 4x4 including jeep & ford unless my I'm not reading what I have found on the internet correctly.

    Now Chris4x4 you asked for pictures. I took these this morning and I have yet to clean it up so it's covered in years of dust but here's a couple of pictures. I have no idea how many miles on it but let's face it the older jeeps never got a ton of miles on them. I'm not going to give this thing away as I know there has to be someone out there interested in a twin stick transfer. I found just the shift sticks and they wanted $168.00transfer 00.jpg transfer 01.jpg
     
  5. Aug 29, 2017 at 4:25 PM
    #5
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    Y
    You are correct in everything you say. The D18 is an amazing Tcase and is bullet proof. The issue with Novak adapters is cost. I looked at that route and by the time I got my Dana20 to work it was just not cost feasible. Someone else might say it is worth the cost. The reason I got my Dana 300 so cheap was because the guy I bought it from bought it from someone else and never used it. He thought it was trashed and needed rebuilt. It didn't. I had 1100 in upgrades on my dana20 low gear and twin stick plus rebuilt. I sold it for $550.
     
    chris4x4 likes this.
  6. Aug 31, 2017 at 2:26 PM
    #6
    DannyH

    DannyH [OP] Member

    Joined:
    Jul 12, 2017
    Member:
    #1673
    Messages:
    8
    Gender:
    Male
    Vehicle:
    95 YJ
    6" lift, 33x12.50x15 A/C
    Ok so that gives me a good idea of what I can start at. I need to clean it up but all the gears are in excellent shape. It does not need to be rebuilt. Thanks for the reponse.
     
  7. Oct 29, 2017 at 9:06 AM
    #7
    Ralmoho

    Ralmoho Member

    Joined:
    Oct 29, 2017
    Member:
    #1970
    Messages:
    12
    Gender:
    Male
    Vehicle:
    43 Willys
    Restored to factory
    Respectfully,how can you assume that it does not need to be rebuilt? It is missing the rear case cap.
    The G503 ww2 jeep site would be a good place to offer it.Good luck w the sale.
     
  8. Oct 29, 2017 at 9:39 AM
    #8
    DannyH

    DannyH [OP] Member

    Joined:
    Jul 12, 2017
    Member:
    #1673
    Messages:
    8
    Gender:
    Male
    Vehicle:
    95 YJ
    6" lift, 33x12.50x15 A/C
    Ralmoho have you ever rebuilt a transfer case or stick shift transmission? I seriously doubt you have or you would not have proposed your question how I can assume it doesn’t need to be rebuilt. When you take a broken transfer or stick shift how does the rebuilder determine the problem? If you can rebuild one you know how. You can physically do a bench test and run through the shifts and see when something is wrong. You started with respectfully but I didn’t start the post to have someone question my skills. I was trying to determine what people thought it was worth. So I think I respectfully answered your question.
     
    JKBob 25 likes this.
  9. Oct 29, 2017 at 6:28 PM
    #9
    Ralmoho

    Ralmoho Member

    Joined:
    Oct 29, 2017
    Member:
    #1970
    Messages:
    12
    Gender:
    Male
    Vehicle:
    43 Willys
    Restored to factory
    Danny,I didn't intend to sound harsh.I'm a noobie and maybe should have left this post be.it had been up since August and was likely concluded anyway...I also should have considered a PM.So,I apologize.My work here...[​IMG]
     
    JKBob 25 and chris4x4 like this.
  10. Oct 29, 2017 at 8:49 PM
    #10
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,874
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Ok....my thought. No reason to apologize dude. The way I read it. You were kinda attached by a members first post. Hello Ralmoho. Might want to post in the new member section, intro yourself, and your experience in rebuilds such as this. Just my thoughts. Your first post, the way I see it. You questioned a members knowledge concerning this post. Not to mention. That's not what his original was about.

    Just saying. You might wanna intro yourself and your experience before you question another member.:).
    Either way... Welcome to the forum.
     
  11. Oct 29, 2017 at 8:54 PM
    #11
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,874
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    But ya know what dude. You did sound harse. Just my observation. Just a suggestiin. Post your experience before you question a members post. Your first post.....you questioned a member. Just saying...
     
  12. Oct 29, 2017 at 10:06 PM
    #12
    Ralmoho

    Ralmoho Member

    Joined:
    Oct 29, 2017
    Member:
    #1970
    Messages:
    12
    Gender:
    Male
    Vehicle:
    43 Willys
    Restored to factory
    Bob,hi,I will take your suggestion,thanks.
     
To Top