1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Electrical plug

Discussion in 'CJ' started by MattLaug24, Sep 11, 2017.

  1. Sep 11, 2017 at 3:39 PM
    #1
    MattLaug24

    MattLaug24 [OP] Member

    Joined:
    Jul 24, 2017
    Member:
    #1703
    Messages:
    11
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1985 Jeep CJ7 6-258
    I need help trying to find one of these things. I don't what it is and I need both sides of the plug. A new distributor would come with one side, but not the other. My distributor isn't very old so I'd prefer not to replace it. Two wires come off the distributor, the other two goes to I think the ICM. Then there's two ground wires on either side. It got torn from the wires at some point and it's rigged to be barely attatched but the ground is kinda poor so it's straining my ignition coil.

    IMG_0901.jpg
     
  2. Sep 11, 2017 at 6:12 PM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,831
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    One choice if the part is hard to find is to disconnect the old repair, make new repairs using longer wires soldered to the plug plus heat shrink tubing to protect the repaired connection.
     
  3. Sep 12, 2017 at 9:02 AM
    #3
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
  4. Sep 12, 2017 at 12:55 PM
    #4
    MattLaug24

    MattLaug24 [OP] Member

    Joined:
    Jul 24, 2017
    Member:
    #1703
    Messages:
    11
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1985 Jeep CJ7 6-258
    An HEI actually might be pretty nice. I HATE electrical. Plus soldering wouldn't be too easy from what it looks like. The wires are dug into the foam/plastic medium of the plug so I feel I'd have to destroy it to figure it out.
     
    JKBob 25 likes this.
To Top