1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking for a frame for my 92 4.0 YJ

Discussion in 'Wrangler YJ (1986-1995)' started by Argetti, Jun 19, 2018.

  1. Jun 19, 2018 at 7:10 PM
    #1
    Argetti

    Argetti [OP] Member

    Joined:
    Jun 19, 2018
    Member:
    #2380
    Messages:
    5
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    1992 YJ Sahara 4.0
    We've inherited a 92 yj project jeep. The frame is rusted to the point where I say it needs to be replaced. Suggestions if there are any on where I can find one? Seen a couple of course, but this is kind of new to me. Thanks if you can help.
     
  2. Jun 19, 2018 at 8:07 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome aboard! Do you have pictures you can post?
     
    Argetti[OP] likes this.
  3. Jun 19, 2018 at 8:14 PM
    #3
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! Post some of the good shots of the YJ (save-the-squares) as well as some of the rusty frame pics as some members could share their frame restoration/replacement experience tips.
     
    Argetti[OP] likes this.
  4. Jun 20, 2018 at 8:34 AM
    #4
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Last edited: Jun 20, 2018
    Argetti[OP] likes this.
  5. Jun 20, 2018 at 8:37 AM
    #5
    Southeast Overland

    Southeast Overland Well-Known Member

    Joined:
    Aug 7, 2017
    Member:
    #1759
    Messages:
    75
    Seneca, South Carolina
    Vehicle:
    1990 Yj, 1994 Yj, 1995 Xj, 1998 Xj, 1990 Xj
    Where are you located?

    ~Jeff
     
  6. Jun 20, 2018 at 2:13 PM
    #6
    Argetti

    Argetti [OP] Member

    Joined:
    Jun 19, 2018
    Member:
    #2380
    Messages:
    5
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    1992 YJ Sahara 4.0
    Thanks for welcoming me. Here are a few pics of what we dug into so far. I was going to weld patches in place of the holes but by doing that I'm afraid of weakening the frame more at the points where I weld it.
    I wasn't looking to spend a ton. We were just supposed to replace the suspension because the leafsprngs were bent at some point from being towed or who knows what. As I kept taking more off the more I noticed the rusty frame and holes. Like behind the steering gear box and towards the rear shackles.
    I live in the south west suburbs of Chicago.20180620_111133_1529511295004.jpg 20180620_111152_1529511294955.jpg 20180620_111236_1529511294910.jpg 20180620_111346_1529511294835.jpg
     
    Last edited: Jun 20, 2018
    chris4x4 likes this.
  7. Jun 20, 2018 at 4:25 PM
    #7
    Argetti

    Argetti [OP] Member

    Joined:
    Jun 19, 2018
    Member:
    #2380
    Messages:
    5
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    1992 YJ Sahara 4.0
    So here are some pics when we trailered it from one location to my house. It sat in this garage for I think nearly 8 to 10 years. My son and his friend got it fired up so we could drive it on the trailer. It leaked every fluid it had. Lol! But we got it up on with no problems. Then from there, we got in the garage and started to get it apart. Obviously all the joints, knuckles, bushings and hoses are going to be replaced. We already started getting some of the engine stuff done too. Replaced the water pump, alternator, starter, pulleys and a couple other things. Yes, we're putting money into it, but we weren't wanting to go crazy. But we all know how that goes. Still trying to keep it reasonable but safe.

    20170409_102149.jpg 20170409_105340.jpg 20170409_121544.jpg 20170830_172416.jpg 20170830_194845.jpg
     
    aggrex likes this.
  8. Jun 20, 2018 at 4:37 PM
    #8
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Looks like it's going to be a good learning experience for sure.
     
    Argetti[OP] likes this.
  9. Jun 20, 2018 at 4:49 PM
    #9
    Argetti

    Argetti [OP] Member

    Joined:
    Jun 19, 2018
    Member:
    #2380
    Messages:
    5
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    1992 YJ Sahara 4.0
    I like the frame replacement idea. I'd feel safer with a solid frame under it. I already have all new leafs and linkage for it. I just needed to be talked into it I think. It's just a little more than I can afford just yet if it's nearly $3000.
     
  10. Jun 20, 2018 at 7:12 PM
    #10
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Depending upon your driving plans/needs that YJ may need that replacement frame sooner than later. Sooner as DD and later as the big project. Patches are probably out of the equation.
     
    Argetti[OP] and Prerunner1982 like this.
  11. Jun 21, 2018 at 6:27 AM
    #11
    Southeast Overland

    Southeast Overland Well-Known Member

    Joined:
    Aug 7, 2017
    Member:
    #1759
    Messages:
    75
    Seneca, South Carolina
    Vehicle:
    1990 Yj, 1994 Yj, 1995 Xj, 1998 Xj, 1990 Xj
    I see a pretty regular stream of clean YJ frames here in SC they seem to hover $1200-$2000. There are some brand new frame options as well that are around $2600.

    Thanks
    Jeff
     
    aggrex and Argetti[OP] like this.
  12. Jun 21, 2018 at 7:16 AM
    #12
    Argetti

    Argetti [OP] Member

    Joined:
    Jun 19, 2018
    Member:
    #2380
    Messages:
    5
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    1992 YJ Sahara 4.0
    I can handle the $1200. That would be worth the trip.
     
  13. Jun 22, 2018 at 5:38 AM
    #13
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    Argetti[OP] likes this.
To Top