1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

93 ZJ Transmission Fluid Change

Discussion in 'Grand Cherokee' started by TinyInkognegroT, Oct 9, 2019.

  1. Oct 9, 2019 at 11:59 AM
    #1
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    This weekend I want to change the filter on my transmission and I also want to change the fluid type from what I currently have in it. Currently I have Dex Merc and I want to change it to ATF 4. Will I need to drain all the fluid out and replace it with ATF 4, torque converter and transmission? Or would I only need to do a couple to a few fluid swaps by draining it from the pan and eventually all the Dex Merc will flush out? Or is it even good to have a mixture of the two at once?
     
  2. Oct 9, 2019 at 1:02 PM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,840
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Draining the pan only removes a certain amount of old fluid. A few more flushes would be needed to remove more old diluted fluid.
     
    JKBob 25 and TinyInkognegroT[OP] like this.
  3. Oct 9, 2019 at 1:16 PM
    #3
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    What about having a mixture of the two if I did that? Is it ok for my transmission ? If not, how would I flush out all of it?
     
  4. Oct 9, 2019 at 3:51 PM
    #4
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,840
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Short of trans disassembly you won't be getting it all out. I think a few drain>fill>run cycles should be sufficient.
     
  5. Oct 9, 2019 at 6:47 PM
    #5
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    Sounds sufficient to me...cftu because tranny disassembly is not what Im into right now... Someday but not right now.
     
  6. Oct 11, 2019 at 4:17 AM
    #6
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    How many quarts are required for the drain from the pan?
     
  7. Oct 11, 2019 at 8:18 PM
    #7
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,878
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Dropping the pain....with filter change. 6 to 8 quarts. Not including the transfer case. Which is bout 2.2 quarts.
    Just be prepared. If you drop the pan. Your gonna need a fairly large pan to catch fluid.
     
    TinyInkognegroT[OP] likes this.
To Top