1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Can't shift gears after changing tranny pressure sensor

Discussion in 'Cherokee' started by Tariq latif, Nov 23, 2017.

  1. Nov 23, 2017 at 5:34 PM
    #1
    Tariq latif

    #1
    Tariq latif [OP] Member

    Joined:
    Nov 23, 2017
    Member:
    #2003
    Messages:
    5
    Gender:
    Male
    Vehicle:
    Cherokee special edition
    I just changed the tranny pressure sensor and governor solenoid. But when I started the engine it does not shift any gear. I cannot take off of the ramps. I put 3 quarts of atf. And I am 100 percent sure I connected the both electrical connectors.
    Anyone can help what could be problem. Front two wheels are still on the ramps

    Terry
     
    Tariq latif, Nov 23, 2017
    #1
  2. Nov 23, 2017 at 6:13 PM
    #2
    JKBob 25

    #2
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Welcome to the forum Terry.

    Sorry I can't help with your issue. Hang tight, I'm sure some will chime in soon. :dancingbacon:
     
    JKBob 25, Nov 23, 2017
    #2
  3. Nov 23, 2017 at 7:08 PM
    #3
    chris4x4

    #3
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome! Not sure how to offer assistance, but maybe someone else may have some insight.
     
    chris4x4, Nov 23, 2017
    #3
  4. Nov 23, 2017 at 8:05 PM
    #4
    aggrex

    #4
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,839
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! Perhaps a little background on what triggered replacing the governor pressure solenoid / pressure sensor might help someone help you. Any error codes? If the trans needs rebuilding start looking for a reputable shop.
     
    aggrex, Nov 23, 2017
    #4
    Bob and chris4x4 like this.
  5. Nov 24, 2017 at 4:40 AM
    #5
    Tariq latif

    #5
    Tariq latif [OP] Member

    Joined:
    Nov 23, 2017
    Member:
    #2003
    Messages:
    5
    Gender:
    Male
    Vehicle:
    Cherokee special edition
    Bob,
    Thanks for replying. I hope someone could give me a lead

    Terry
     
    Tariq latif, Nov 24, 2017
    #5
  6. Nov 24, 2017 at 4:46 AM
    #6
    Tariq latif

    #6
    Tariq latif [OP] Member

    Joined:
    Nov 23, 2017
    Member:
    #2003
    Messages:
    5
    Gender:
    Male
    Vehicle:
    Cherokee special edition
    I was getting PO1763 code once in a while, otherwise it was running fine, so i learned online that is is code for pressure sensor and governor so I changes both but after changing now i am stuck on the ramps not engaging to any gear forward or reverse.
     
    Tariq latif, Nov 24, 2017
    #6
  7. Nov 24, 2017 at 7:45 AM
    #7
    chris4x4

    #7
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Have you checked the fuse?
     
    chris4x4, Nov 24, 2017
    #7
  8. Nov 24, 2017 at 9:26 AM
    #8
    OFFGRID

    #8
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    What year make and model is the jeep you are working on? This is out of my realm of familiarity, but I am pretty good at research on the net. I assume you were able to drive it onto the ramps?
     
    OFFGRID, Nov 24, 2017
    #8
    JKBob 25 likes this.
Register FREE to Reply!
To Top