1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

My $120 CJ7 build

Discussion in 'Jeep CJ Builds' started by daddyusmaximus, Aug 25, 2017.

Page 2 of 13
  1. Nov 29, 2017 at 6:34 PM
    #21
    daddyusmaximus

    #21
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Doors, hood, windshield off, and rear seat out. Real hard to do anything with only one thumb in working order.

    [​IMG]

    Got a buddy coming over to help see if we can get the 258 running tomorrow. Don't really care, I'm not using it, and I'm not putting a single dollar in it, but it would be nice to know when I go to sell it later. Hell, I'll be happy if it's not froze up seeing as it's been sitting about 4 years.
     
    daddyusmaximus, Nov 29, 2017
    #21
    OFFGRID, JKBob 25 and chris4x4 like this.
  2. Nov 29, 2017 at 6:48 PM
    #22
    JKBob 25

    #22
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Good luck. Definitely helps resale value if it runs. Could help you finance your build.
     
    JKBob 25, Nov 29, 2017
    #22
  3. Dec 9, 2017 at 2:16 PM
    #23
    daddyusmaximus

    #23
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Turns out the engine has a knock in either the front or second cylinder. It will barely run, but it should be rebuildable. Knowing something is better than knowing nothing.

    Thumb is healing very slowly, and the cold weather not helping, but a few more things have come off under Brandy's watchful eye. Brandy is my 96 lb German Shepherd who works as a PTSD/TBI/ service dog. She is with me pretty much 24/7.

    [​IMG]
     
    daddyusmaximus, Dec 9, 2017
    #23
    aggrex, JKBob 25, OFFGRID and 1 other person like this.
  4. Jan 3, 2018 at 1:13 AM
    #24
    SILVERBACK0508

    #24
    SILVERBACK0508 Active Member

    Joined:
    Mar 30, 2017
    Member:
    #1254
    Messages:
    43
    Gender:
    Male
    First Name:
    Kyle
    Oregon
    Vehicle:
    1980 Jeep CJ 7 black
    Pretty much stock
    This is an awesome project. I mean a $120 CJ-7, I'da thought I'd died and gone to heaven if I came across that deal. Keep it up I'd love to see how this turns out!
     
    SILVERBACK0508, Jan 3, 2018
    #24
    JKBob 25 and chris4x4 like this.
  5. Feb 26, 2018 at 7:10 PM
    #25
    daddyusmaximus

    #25
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Things have been crazy, but I managed to get a "new" tub home for the build so I don't have to mess with all the rust issues. This one has been all over the country. It's is out of Utah. I found it online on a Facebook Jeep page from a guy in Colorado. So we strike a deal, and he's bringing it to me... and he blows up the engine in his truck in Kansas. It gets towed to a diesel shop in Nebraska, and that's where I end up having to go get it myself. At least I got out of flooded Indiana for 3 days.


    [​IMG]

    [​IMG]
     
    daddyusmaximus, Feb 26, 2018
    #25
    chris4x4, aggrex and JKBob 25 like this.
  6. Feb 26, 2018 at 7:25 PM
    #26
    JKBob 25

    #26
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Welcome back @daddyusmaximus. Good to see ya back on the boards.
    Wow....another cool story for your build. The chassis has been here, the tub....as you already posted the history of this one. Lolll. And more to add to it.

    In your pic of it being towed out. Theres a few relics in that yard I wouldn't mind crawling around in. Looks like a CJ and YJ. And possibly an International in the background. A Chevy off to the left.....oh.....Sorry. Kinda drifted there. My bad. Sorry.

    Post up more of your build dude. Welcome back.....
     
    JKBob 25, Feb 26, 2018
    #26
  7. Feb 27, 2018 at 5:22 AM
    #27
    daddyusmaximus

    #27
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    The guy was a Jeep fan, but a specialist in Model T work. Had a few of those too.
     
    daddyusmaximus, Feb 27, 2018
    #27
    JKBob 25 and chris4x4 like this.
  8. Mar 1, 2018 at 8:27 AM
    #28
    daddyusmaximus

    #28
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Spent yesterday taking (breaking) off the body mount bolts to the old tub. Three of them broke. I'm going to position the Jeep so I can take the old tub off and set it on saw horses next to the "new" tub 'til I get it ready to mount. With my memory it will be easier to just remove parts from the old tub and directly mount them onto the new tub without delay. There is some work to do to it. The tailgate bolts are broke off in it, and some body mount bolts broke off in it... Sucks buying crap on the internet, but the sides aren't rusting away from the fender wells and the cowl isn't rusted away.

    There will be some changes as the "new" tub is an "older" (unknown year) tub. It did come with a different under dash vent to mate to the heater box, but the gas filler is also different... it's round. No room for the big rectangle plastic insert of the 1980 one from my tub... The roll bar won't mount in either, but I'm planing a custom cage, so that's no biggie.

    The frame will be taking shape on the other side of the garage as the powertrain and suspension gets swapped out.
     
    daddyusmaximus, Mar 1, 2018
    #28
    JKBob 25 and chris4x4 like this.
  9. Mar 1, 2018 at 12:42 PM
    #29
    OFFGRID

    #29
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    My 79 has no door latches either like on the 85, but do have a big square hole for the gase cap insert. It is at least older than mine. Your new body looks great.
     
    OFFGRID, Mar 1, 2018
    #29
  10. Mar 13, 2018 at 7:35 PM
    #30
    daddyusmaximus

    #30
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Today was tub off Tuesday...


    [​IMG]
     
    daddyusmaximus, Mar 13, 2018
    #30
    JKBob 25 and chris4x4 like this.
  11. Mar 13, 2018 at 7:36 PM
    #31
    daddyusmaximus

    #31
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    [​IMG]
     
    daddyusmaximus, Mar 13, 2018
    #31
    JKBob 25 and chris4x4 like this.
  12. Mar 13, 2018 at 7:36 PM
    #32
    daddyusmaximus

    #32
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    [​IMG]
     
    daddyusmaximus, Mar 13, 2018
    #32
    JKBob 25, aggrex and chris4x4 like this.
  13. Mar 13, 2018 at 7:37 PM
    #33
    daddyusmaximus

    #33
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    [​IMG]
     
    daddyusmaximus, Mar 13, 2018
    #33
    JKBob 25 and chris4x4 like this.
  14. Mar 15, 2018 at 4:28 PM
    #34
    daddyusmaximus

    #34
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Engine came out today along with brake and fuel lines.

    [​IMG]



    Here you can see the old ventilated I-6 (#3 rod through block) on a couple car dollies, and behind it on the engine stand is the Mopar 360 that will go in Jeep when all is said and done.



    [​IMG]
     
    daddyusmaximus, Mar 15, 2018
    #34
    JKBob 25, aggrex and chris4x4 like this.
  15. Mar 15, 2018 at 6:21 PM
    #35
    JKBob 25

    #35
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    JKBob 25, Mar 15, 2018
    #35
  16. Mar 25, 2018 at 9:55 AM
    #36
    daddyusmaximus

    #36
    daddyusmaximus [OP] Well-Known Member

    Joined:
    Nov 2, 2016
    Member:
    #446
    Messages:
    303
    Gender:
    Male
    Vehicle:
    '79 CJ5
    360, D44 front, Chrysler 8.25 rear, 4 wheel discs, rear Detroit locker
    Trans and T-case is out...

    [​IMG]

    Brandy inspects my work.

    [​IMG]
     
    daddyusmaximus, Mar 25, 2018
    #36
    aggrex and JKBob 25 like this.
  17. Mar 25, 2018 at 6:02 PM
    #37
    JKBob 25

    #37
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    JKBob 25, Mar 25, 2018
    #37
  18. Mar 26, 2018 at 1:03 PM
    #38
    JeffCJ

    #38
    JeffCJ New Member

    Joined:
    Mar 26, 2018
    Member:
    #2205
    Messages:
    1
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    1989 YJ
    Google led me to this build thread. Decided to sign up here so I can follow along. Great progress so far @daddyusmaximus!
     
    JeffCJ, Mar 26, 2018
    #38
    chris4x4 likes this.
  19. Mar 26, 2018 at 2:42 PM
    #39
    chris4x4

    #39
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome aboard!
     
    chris4x4, Mar 26, 2018
    #39
  20. Mar 26, 2018 at 5:51 PM
    #40
    aggrex

    #40
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,839
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! Post a little introduction of your YJ and a bit about yourself in a new thread. Glad the $120 CJ attracted you here. YJs have a following here bigger than the JL for now...LoL
     
    aggrex, Mar 26, 2018
    #40
Page 2 of 13
Register FREE to Reply!
To Top