1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lug Stems Snapped Off at Dealer's Scheduled Service

Discussion in 'Wheels & Tires' started by cheeze, Mar 24, 2018.

  1. Mar 24, 2018 at 7:01 AM
    #1
    cheeze

    cheeze [OP] New Member

    Joined:
    Mar 24, 2018
    Member:
    #2196
    Messages:
    1
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2018 Cherokee Trailhawk
    I took my jeep in for it's first oil change and tire rotation. 7,000 miles. The service manager informed me that a lug stem snapped off on two tires. He claimed the new jeeps tires are being installed by robots at the factory and they were overtightened. They have ordered two new hubs and I am waiting for them to arrive. They said the other two hubs did not need to be replaced. Does anyone smart on this have any thoughts? The 'robots at the factory' story sounds like BS to me.

    IMG_6177.jpg
    IMG_6176.jpg
     
    JKBob 25 likes this.
  2. Mar 24, 2018 at 7:25 AM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,831
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! Good thing the studs broke at the shop otherwise losing a wheel or two on the road would be bad. Robots programmed to over-tighten lugs would have been news worthy at 11pm.
     
    JKBob 25 likes this.
  3. Mar 24, 2018 at 8:13 AM
    #3
    JDMcQ

    JDMcQ Well-Known Member

    Joined:
    Mar 23, 2018
    Member:
    #2191
    Messages:
    163
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2018 JLUR
    It is all part of Skynet's master plan.
     
    JKBob 25 and chris4x4 like this.
  4. Mar 24, 2018 at 9:24 AM
    #4
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome! I would really doubt the hydraulic torque mechanism at the factory did that. I would be more likely to think the guy at the shop didn't use a torque wrench when tightening them.
     
    JKBob 25 and JDMcQ like this.
  5. Mar 24, 2018 at 9:42 AM
    #5
    JDMcQ

    JDMcQ Well-Known Member

    Joined:
    Mar 23, 2018
    Member:
    #2191
    Messages:
    163
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2018 JLUR
    Perhaps the mechanic didn't have his ugga-duggas properly calibrated.

    I have to agree with you. The factory, while not perfect, isn't going to tighten things until they break. More than likely someone got overzealous with the impact at the dealership.
     
    chris4x4[QUOTED] likes this.
  6. Mar 24, 2018 at 12:13 PM
    #6
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,831
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    That's why I re-torque all lug nuts after any tire service. Better to find out in the driveway than out on the road. Even after the best of services I have found over-tightened or cross-threaded lug nuts ON:annoyed:
     
    JKBob 25 likes this.
  7. Mar 25, 2018 at 8:37 PM
    #7
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,874
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Yeah...agree with above posts.
    My New Years Resolution. Some what late...lolll. Be nice.....since my rep has been ...umm ...questionable. ...
    Agree with previous posts. Over torquing can with out a doubt... yeah. Leave you nutless. Ok....I need help.....I get it. But come on.....:rofl:.
    Post up your fix dude. I'm sure others on the forum can learn from it.
     
To Top