1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Hardtop side glass removal YJ

Discussion in 'Wrangler YJ (1986-1995)' started by Mxdad777, Aug 4, 2018.

  1. Aug 4, 2018 at 4:55 AM
    #1
    Mxdad777

    Mxdad777 [OP] Member

    Joined:
    Aug 4, 2018
    Member:
    #2487
    Messages:
    10
    Gender:
    Male
    Vehicle:
    1987 Wrangler YJ
    i picked up a used hardtop for my YJ and am going to paint it. I’ve got it stripped down, but not sure how to remove the side glass. It looks like it’s a combo seal/sealant and not just a seal. Does anyone have any experience in removing the side glass on a YJ?
    Thanks in advance for and help.
     
  2. Aug 4, 2018 at 8:40 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome to the site! I think its attached with an adhesive. You might want to contact a glass company and see what they recommend, or just take extra time to mask it off.
     
  3. Aug 4, 2018 at 9:02 AM
    #3
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! I second Chris's comment as removing glass to paint would not be my choice. I'm sure it's glued on pretty well. What's the plan for the hardtop? Solid panel in place of the glass? Scratches? Get it tinted.
     
  4. Aug 4, 2018 at 9:52 AM
    #4
    Mxdad777

    Mxdad777 [OP] Member

    Joined:
    Aug 4, 2018
    Member:
    #2487
    Messages:
    10
    Gender:
    Male
    Vehicle:
    1987 Wrangler YJ
    The glass is in great shape I was just wanting to remove it for ease of painting. The fact that it is glued in, I’m just going to mask it. I talked to an auto glass place today and they want $150 to reinstall and said it will be a pain to remove. Masking tape it is.
     
    chris4x4 likes this.
  5. Aug 6, 2018 at 7:20 AM
    #5
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Be sure to post pictures to show us how it turns out :)
     
  6. Aug 6, 2018 at 8:11 AM
    #6
    Mxdad777

    Mxdad777 [OP] Member

    Joined:
    Aug 4, 2018
    Member:
    #2487
    Messages:
    10
    Gender:
    Male
    Vehicle:
    1987 Wrangler YJ
    Well, after doing a little more research, I found that the glass is glued in but the rubber seal isn't really a seal as much as its a rubber trim piece. I grabbed it and pulled on it and it came out from around the window. The rubber is kind of like a "T" molding. I can now tape off the glass and paint the entire top and then replace the rubber with new trim. I'll post pics when I'm done.
     
    chris4x4 and aggrex like this.
  7. Aug 6, 2018 at 7:01 PM
    #7
    Mxdad777

    Mxdad777 [OP] Member

    Joined:
    Aug 4, 2018
    Member:
    #2487
    Messages:
    10
    Gender:
    Male
    Vehicle:
    1987 Wrangler YJ
    DCF73A63-6718-442B-B253-CF557FEA1B6E.jpg 2F384848-561A-41D8-B211-0B38C89A3F66.jpg After much research I decided to texture the top and I used Dupli-Color Rocker Guard Coating for the texture. It laid down a nice even light texture. I followed that up with SEM Trim Black paint with a medium reducer at a 1:1 ratio. I’m very happy with the way it turned out. Below is a pic along with a close up to show the texture.
    Now to get all the rubbers replaced and the rear hatch glass put back on. Then it’s onto the doors. I’ll be painting them blue to match the Jeep.
     
    chris4x4 likes this.
  8. Aug 6, 2018 at 7:50 PM
    #8
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Nice PRO job on refinishing the hard top. I'm finding minor defects on my newer hardtop that I have to ignore or use a quick dash of paint on scrapes or chips.
     
  9. Aug 7, 2018 at 6:53 AM
    #9
    boondoc89

    boondoc89 Well-Known Member

    Joined:
    Feb 3, 2017
    Member:
    #912
    Messages:
    772
    Gender:
    Male
    First Name:
    alex
    Vehicle:
    08 JKU
    3 inch zone lift. Fox 2.0 shocks. 35 inch nitto ridge grapplers. Bushwacker flat fenders. No name steel bumpers front and back for now.
    Always replace your rubbers :devil:
     
    chris4x4 likes this.
  10. Aug 7, 2018 at 7:18 AM
    #10
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    That looks great!
     
  11. Aug 19, 2018 at 9:10 PM
    #11
    Mxdad777

    Mxdad777 [OP] Member

    Joined:
    Aug 4, 2018
    Member:
    #2487
    Messages:
    10
    Gender:
    Male
    Vehicle:
    1987 Wrangler YJ
    Finally finished the doors and got everything put back together. The color isn’t an exact match, but I didn’t want to mess with blending and so I went with it. I don’t think anyone will notice unless they look close. I’m also a believer in the vinyl paint dye. A local upholstery shop told me about it and my local auto paint store had nothing but great things to say about it. I figure if it holds up on seats, it should hold up on door panels. I guess time will tell. All in all I’m very happy with my new to me hardtop and doors.

    5850D4BC-2660-43A4-9284-8128EB64F388.jpg
    758AFCCE-D91A-4074-8F6C-443B4123586D.jpg
     
    chris4x4 and aggrex like this.
  12. May 7, 2020 at 7:31 AM
    #12
    SrdjanDV

    SrdjanDV Active Member

    Joined:
    May 6, 2020
    Member:
    #4627
    Messages:
    30
    Gender:
    Male
    First Name:
    Srdjan
    Vehicle:
    1995 Jeep YJ, olive drab, V8, chey drietrain.
    engine swap as well as the entire drivetrain, 35 inch tires, home made swing away tire carrier, warn winch and SPOA.
    Great job, looks nice. Congrats!!
     
  13. May 7, 2020 at 4:46 PM
    #13
    LYFZGOOD

    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    929
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Wow August 20-2018 I guess it’s never to
    late for congrats. So congratulations!!!
     
    Last edited: May 7, 2020
To Top