1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Discontinued motor mount bracket

Discussion in 'Wrangler YJ (1986-1995)' started by elinn24, Oct 3, 2018.

  1. Oct 3, 2018 at 2:21 PM
    #1
    elinn24

    #1
    elinn24 [OP] New Member

    Joined:
    Oct 3, 2018
    Member:
    #2630
    Messages:
    2
    Gender:
    Female
    First Name:
    Erica
    Vehicle:
    1994 green Wrangler
    none
    Hello!



    On the hunt for a motor mount bracket for a 1994 Wrangler. This bracket has been discontinued. It is between the motor mount and the frame sill on the passenger side of the motor. (part #52058562)



    Does anyone have any good suggestions on where to look?? I have called quite a few salvage yards and looked on vintagejeeps.com. Searches on here haven't come up with anything so far.



    We have even gone to the welding shop to see if we could fabricate this piece, but no go.



    I would appreciate any help I could get with this!!!



    Thank you!

    Erica
     
    elinn24, Oct 3, 2018
    #1
    UtahJeep13 likes this.
  2. Oct 3, 2018 at 2:41 PM
    #2
    Bob

    #2
    Bob Well-Known Member Moderator

    Joined:
    Jul 18, 2016
    Member:
    #1
    Messages:
    770
    Gender:
    Male
    Bob, Oct 3, 2018
    #2
  3. Oct 3, 2018 at 4:17 PM
    #3
    Prerunner1982

    #3
    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Using some flat stock with the proper hole and studs that should be able to be easily reproduced even if it doesn't look pretty. It's just a motor mount offset adapter plate specific to the 2.5 liter.

    Sounds like your other option is a I6 or V8 swap..

    Welcome to Jeeps.net Erica!
     
    Prerunner1982, Oct 3, 2018
    #3
  4. Oct 3, 2018 at 5:11 PM
    #4
    chris4x4

    #4
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome!
     
    chris4x4, Oct 3, 2018
    #4
  5. Oct 3, 2018 at 6:08 PM
    #5
    JKBob 25

    #5
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,874
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Welcome to the site.
    Good luck in your search.
     
    JKBob 25, Oct 3, 2018
    #5
  6. Oct 5, 2018 at 2:46 PM
    #6
    elinn24

    #6
    elinn24 [OP] New Member

    Joined:
    Oct 3, 2018
    Member:
    #2630
    Messages:
    2
    Gender:
    Female
    First Name:
    Erica
    Vehicle:
    1994 green Wrangler
    none
    Thank you everyone!!! Looking through a couple of other forum discussions, I went to Rockauto. Typed in my part number and it gave me another one, but no pictures. Little more searching and I found a picture! And it is the part I needed! $26!!! The internet is great somedays! :) Helping me get my beater back on the road!!!!
     
    elinn24, Oct 5, 2018
    #6
    Prerunner1982, aggrex and chris4x4 like this.
  7. Oct 5, 2018 at 7:04 PM
    #7
    aggrex

    #7
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,840
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Glad you were able to find the part at Rock Auto. Post some pics of your repair. It could help another YJ owner with a challenging project.
     
    aggrex, Oct 5, 2018
    #7
Register FREE to Reply!
To Top