1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need help with wheel size

Discussion in 'Wrangler JK (2007-2017)' started by Wildwood737, Apr 17, 2019.

  1. Apr 17, 2019 at 1:37 PM
    #1
    Wildwood737

    Wildwood737 [OP] New Member

    Joined:
    Apr 17, 2019
    Member:
    #3089
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2015 Jeep Wrangler sport
    New to the forum and new to Jeep. Retired senior. Just purchased a 2015 JK that needs new tires. The current wheel is 225/75/16.I wanted to upgrade the tires and wheels. I purchase 265/70/17 and new wheel. Not installed yet. I ordered the wheels today. they are 17x8. Had to pick between 10mm and 25mm offset. Thinking less is better I picked 10mm. Wanted to stay close to stock. Now I am concerned I made a mistake. Should I be concerned at all about look and fit at 10mm? Appreciate any input
     
    Last edited: Apr 17, 2019
  2. Apr 17, 2019 at 2:17 PM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,839
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @Wildwood737 OEM wheels have 6.25" backspacing so your wheels should fit. Offset and backspacing are terminology that gets confused quite often. Think of offset as the measurement from the mounting surface to the CENTER of the wheel. 10mm offset is approximately 4.89".
     
  3. Apr 17, 2019 at 6:59 PM
    #3
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,839
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    @Wildwood737 this is approximately what you can expect.

    IMG_20190417_215749.jpg
     
  4. Apr 17, 2019 at 8:19 PM
    #4
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    It should fit easily with room.
     
  5. Apr 17, 2019 at 8:54 PM
    #5
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    WElcome to the site!
     
  6. Apr 20, 2019 at 5:05 AM
    #6
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    Welcome from Texas
     

Products Discussed in

To Top