1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clunk Going In Reverse

Discussion in 'Wrangler JK (2007-2017)' started by Jeepwilli, Jun 6, 2019.

  1. Jun 6, 2019 at 10:37 AM
    #1
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift
    Hey all,
    I’m new to the forum, but very happy to be here. I tried the search function, but can’t find the answer to my question. I hope this is the right forum. If not, my apologies!

    2007 JK automatic 2.5” lift. No other major mods.

    When I first start the Jeep, it doesn’t want to shift out of P. Then, after a second, I get it into R, but there is a big clunk when I do. Here is a video of the DS and rear diff when it happens. Thanks in advance if you can help!

    https://youtu.be/wEpfH-tlkYY
     
    TJ_abuser likes this.
  2. Jun 6, 2019 at 11:02 AM
    #2
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Hello Chris,
    That is interesting. Seems like something is binding and the deflection in the rear pinion can't be good on the bearing.
    Unfortunately, I have no answers though if it were me I would probably disconnect the driveshaft from the transfer case and see if it still binds and makes a clunking sound.
     
    TJ_abuser and aggrex like this.
  3. Jun 6, 2019 at 12:14 PM
    #3
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    Are you parking on a hill? The way automatics work the parking brake is a dog that goes up against a gear if it's on a hill it puts extra pressure on the dog and gear. My LJ does when I park on a hill. Ok after watching the video n/m everything I just said. Welcome from Texas .
     
    Prerunner1982 likes this.
  4. Jun 6, 2019 at 12:49 PM
    #4
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift
    Seems so obvious to remove the ds to isolate transmission from Drive components. But, I never would have thought about it! I’ll give it a try :)

    Thanks for the idea. Not a hill isssue for sure. Hope it is cooler in TX than it is here. 5 minute intervals working on it before it gets too hot to continue!
     
  5. Jun 6, 2019 at 12:51 PM
    #5
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    Hot and humid today feels like the tropics without the breeze. Sweat sitting in the shade today.
     
  6. Jun 6, 2019 at 12:53 PM
    #6
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Cooler in Texas? o_O Where are you from Chris?
    I forgot to say, welcome from Oklahoma.
     
  7. Jun 6, 2019 at 12:58 PM
    #7
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    I heard it's raining there again and the dam at Tulsa is being over taxed
     
  8. Jun 6, 2019 at 1:00 PM
    #8
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    Only place hotter than here is Arizona in the low desert. 120 with no humidity.
     
    chris4x4 likes this.
  9. Jun 6, 2019 at 1:01 PM
    #9
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Yeah we had some pretty bad flash flooding again, so saturated at this point it doesn't take much. We've got to dry out soon, I have some work to do on the driveway now.
     
    TJ_abuser likes this.
  10. Jun 6, 2019 at 2:57 PM
    #10
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift
    I'm in Phoenix. We've had a cool spring, so now that its warmed up, the middle of the day is no good for working on the Jeep!

    Quick thought...since it takes an extra second to shift out of P, is it possibly a shift linkage? Seems like it wouldn't be the DS or Gears since the initial issue is getting it out of park. Also, it comes out of park easily after the initial start up. I did get the diff cover off, and all seems well in there. No gears ground down, broken teeth, etc... A very little play in the pinion gear (I think that's what it's called...the one that goes in the back of the diff), but it seems within what would be normal to me.

    Thanks again for the help!
     
  11. Jun 6, 2019 at 6:33 PM
    #11
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift
    Ok, one more note: the clunking sound is coming from the pinion/rear diff. Jeep got a 2.5” lift a couple weeks ago and now has 33” MTs. Any adjustment to the angle/pinion depth required? I guess I’m still not sure why it only clunks when going into reverse.

    Oh, and one more! Haha. Noise goes away when I put it in 4wd.

    Hmmm... no more time to mess with it today, but I can’t stop thinking about it! Lol
     
  12. Jun 6, 2019 at 7:49 PM
    #12
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,874
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    Where is @OFFGRID when we need him. He's our best at these issues..
    Does any one have his Bat Signal? Or in this case....OFFGRID signal......
     
    Jeepwilli[OP] likes this.
  13. Jun 6, 2019 at 8:14 PM
    #13
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    Clunking only in reverse I would imagine is from gear slack I know ring and pinion will do that when they are worn out . I've worn a few out and they always started making a noise I put 33's on my Dana 44 and it didn't start clunking in reverse
     
  14. Jun 7, 2019 at 10:59 AM
    #14
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift

    Anyone smarter than me see anything obvious here? Thanks in advance! I appreciate any help!
     
  15. Jun 7, 2019 at 11:15 AM
    #15
    Prerunner1982

    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    I am by far the furthest thing from a diff expert but those side spider gears look ate up to me.
     
    aggrex likes this.
  16. Jun 7, 2019 at 2:56 PM
    #16
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    I see no locker ..... Good enough excuse to take it in and have it inspected and a locker installed.....lol easy to say when it's someone else's money .... Yep Jon those spider gears have mushrooming on the ends of the teeth it looks like.
     
    aggrex likes this.
  17. Jun 7, 2019 at 2:59 PM
    #17
    TJ_abuser

    TJ_abuser Well-Known Member

    Joined:
    Sep 18, 2018
    Member:
    #2590
    Messages:
    1,013
    First Name:
    Todd
    Vehicle:
    2005 jeep unlimited
    2 inch lift, bumper and winch 33" mud claw
    The wear pattern don't look very good either
     
  18. Jun 7, 2019 at 5:35 PM
    #18
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    The worn spider gears may make some noise but the clunk occurs when shifted in reverse / hard to disengage PARK might be something else.
     
  19. Jun 8, 2019 at 4:41 PM
    #19
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    If the clunk is heard in the Diff, I would think that would be indicative of worn pinion gear, or bearing?
     
    Jeepwilli[OP] and TJ_abuser like this.
  20. Jun 11, 2019 at 10:22 AM
    #20
    Jeepwilli

    Jeepwilli [OP] Member

    Joined:
    Jun 6, 2019
    Member:
    #3325
    Messages:
    6
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2007 Silver 2 Dr X JK
    2.5” Lift
    Ok, finally getting around to looking at this again today. I watched the video again, and I notice that the first time the clunk happens, I can see the Pinion Yoke move outward just a bit. I'm suspecting that maybe the pinion nut was removed at some point and not torqued back down to speck. Maybe the crush save didn't crush or the bolt is coming loose. I'm going to remove the DS, but wanted to see if anyone has opinions on my suspicions. I'm not versed in gears at all, so kind of grasping at straws here before I charge up a bill at the mechanic.

    Thanks again!
     

Products Discussed in

To Top