1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Subwoofer and amp wiring routing for 93 ZJ

Discussion in 'Grand Cherokee' started by TinyInkognegroT, Jun 25, 2019.

  1. Jun 25, 2019 at 8:17 AM
    #1
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    What's the best route on a 93 ZJ to run my 16 ft Power and RMS wires (from battery to back cargo) so that I can hide and cause less damage to these wires ? ...Also what size are the screws for the radio/dash assembly ? Missing 3 that hold it in place.
     
  2. Jun 25, 2019 at 10:26 AM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Every vehicle is different but generally through the firewall under the carpet then either along the trans tunnel or door sill to the cargo area. Take some of the remaing screws to hardware store to get something similar.
     
    TinyInkognegroT[OP] likes this.
  3. Jun 25, 2019 at 12:37 PM
    #3
    TinyInkognegroT

    TinyInkognegroT [OP] Well-Known Member

    Joined:
    May 26, 2019
    Member:
    #3261
    Messages:
    576
    Gender:
    Male
    Vehicle:
    1993 Grand Cherokee Limited 5.2L AWD
    I
    Went along and under the passenger side trim.
     
    Billy1234 likes this.
To Top