1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Issues after replacing brake booster

Discussion in 'Wrangler TJ (1996-2006)' started by Pir2l8, Jul 19, 2019.

  1. Jul 19, 2019 at 5:08 PM
    #1
    Pir2l8

    Pir2l8 [OP] New Member

    Joined:
    Jul 13, 2019
    Member:
    #3515
    Messages:
    4
    Gender:
    Male
    First Name:
    James
    Vehicle:
    2002 Jeep Wrangler Sport
    replaced the brake booster now when you press the brake pedal now it whistles and the brake lights stay on, what do I do now
     
  2. Jul 20, 2019 at 2:23 PM
    #2
    Jim Beam

    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    There is a sensor that rubs against the rotor to indicate worn brakes, it could need adjustment. Although, it could be a vacuum leak. For the brake light issue, check the brake light switch where it contacts the pedal.
     
    Bob, JKBob 25 and aggrex like this.
To Top