1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What type of oil do I need for a Jaspers 4.2 L Inline 6 258 engine?

Discussion in 'CJ' started by Mylinh89, Aug 5, 2019.

  1. Aug 5, 2019 at 12:13 AM
    #1
    Mylinh89

    #1
    Mylinh89 [OP] New Member

    Joined:
    Aug 5, 2019
    Member:
    #3639
    Messages:
    4
    Gender:
    Female
    Vehicle:
    1983 completely rebuilt CJ 7
    CJ 7 Renegade
    Hi guys,

    I bought a CJ 7 from a nice owner with a completely rebuilt Jaspers 4.2 L Inline 6 258 engine. I would like to replace existing oil with high performance synthetic oil but don't know what type of oil I need to use / should use for the Jaspers 4.2 L Inline 6 258 engine.

    Much appreciate any info, thanks again.
     
    Mylinh89, Aug 5, 2019
    #1
  2. Aug 5, 2019 at 7:41 AM
    #2
    aggrex

    #2
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,839
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @Mylinh89 ...my suggestion would be to contact Jasper directly. I can't see how quality syn 5W30 would be a problem.
     
    aggrex, Aug 5, 2019
    #2
    Mylinh89[OP] and JKBob 25 like this.
  3. Aug 5, 2019 at 2:56 PM
    #3
    Mylinh89

    #3
    Mylinh89 [OP] New Member

    Joined:
    Aug 5, 2019
    Member:
    #3639
    Messages:
    4
    Gender:
    Female
    Vehicle:
    1983 completely rebuilt CJ 7
    CJ 7 Renegade
    Ok. I will give them a call, thanks much for your reply.
     
    Mylinh89, Aug 5, 2019
    #3
  4. Aug 5, 2019 at 8:40 PM
    #4
    JKBob 25

    #4
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,877
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    I had a Jasper 4.0 inline dropped in my 2000 XJ. They had a break in oil in it which I was told to replace after 500 miles. Their break in period. And I could replace it with any oil I desired. Which I did with as @aggrex mentioned. 5w30 full synthetic. And put about 175k on it before I traded it in. You'll be fine with the same.
    And just to clarifie. Jasper remanufactures Mopar motors. You should use what is spec'ed for motor. Synthetic or not.

    BTW. @Mylinh89 . Well ome to the forum. :jeepwave:
     
    Last edited: Aug 5, 2019
    JKBob 25, Aug 5, 2019
    #4
    Mylinh89[OP] and aggrex like this.
Register FREE to Reply!
To Top