1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Muffler Fuel injector Where to mount aux light rocker switches? Best GPS for your rig Soft top recommendations Code reader

How to know if a bumper can support a winch?

Discussion in 'Wrangler TJ (1996-2006)' started by Qwuark, May 4, 2020.

  1. May 4, 2020 at 5:14 PM
    #1
    Qwuark

    #1
    Qwuark [OP] Member

    Joined:
    Dec 4, 2019
    Member:
    #4160
    Messages:
    12
    Gender:
    Male
    Vehicle:
    02 TJ
    1.5" spacers
    I bought by 02 TJ a couple years ago. It came with one of those tube type bumpers. I want to get a winch but don't know to tell if I need a new bumper. A picture is attached. Any thoughts would be helpful.

    20191113_194636.jpg
     
    Qwuark, May 4, 2020
    #1
  2. May 4, 2020 at 7:19 PM
    #2
    aggrex

    #2
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,840
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    To securely mount the winch to the frame you will need a winch mounting plate. Next check to see if the upper tube of the tube bumper provides clearance for proper winch function. Based off the pic there may be interference.
     
    aggrex, May 4, 2020
    #2
    Qwuark[OP] likes this.
  3. May 4, 2020 at 9:53 PM
    #3
    Jim Beam

    #3
    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    You might want to contact the maker of the winch that you plan to use for verification.
     
    Jim Beam, May 4, 2020
    #3
    Qwuark[OP] likes this.
  4. May 5, 2020 at 2:08 PM
    #4
    Qwuark

    #4
    Qwuark [OP] Member

    Joined:
    Dec 4, 2019
    Member:
    #4160
    Messages:
    12
    Gender:
    Male
    Vehicle:
    02 TJ
    1.5" spacers
    Thank You both. Based on the pic, does it look like a mounting plate will attach to the frame?
     
    Qwuark, May 5, 2020
    #4
  5. May 5, 2020 at 2:28 PM
    #5
    Jim Beam

    #5
    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    I have a Warn mount on my CJ and the oem winch mount is bypassed so the mount is attached to the frame. Although in your case that aftermarket front bumper might be an issue. If you do a lot of off highway travel, it is a good idea to check the frame for cracks.
     
    Jim Beam, May 5, 2020
    #5
    Qwuark[OP] likes this.
  6. May 5, 2020 at 3:01 PM
    #6
    Qwuark

    #6
    Qwuark [OP] Member

    Joined:
    Dec 4, 2019
    Member:
    #4160
    Messages:
    12
    Gender:
    Male
    Vehicle:
    02 TJ
    1.5" spacers
    Thanks Jim!
     
    Qwuark, May 5, 2020
    #6
Register FREE to Reply!
To Top