1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CJ rear bumper bolts

Discussion in 'CJ' started by unclejohnny75, May 4, 2020.

  1. May 4, 2020 at 10:55 AM
    #1
    unclejohnny75

    unclejohnny75 [OP] Member

    Joined:
    May 4, 2020
    Member:
    #4617
    Messages:
    6
    Gender:
    Male
    First Name:
    John
    Vehicle:
    1981 CJ7
    I bought an aftermarket bumper for my 1981 CJ7. The instructions say to use the two factory bolts that thread into the frame from the bottom. The bolts that mount horizontally were included with the new bumper. My jeep didn't have a bumper when I bought it, so I need to purchase those two bolts. I have had no luck in finding the size of those bolts.
     
  2. May 4, 2020 at 11:16 AM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,832
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @unclejohnny75 ...start the search by contacting Quadratec.com for miscellaneous CJ parts. Local hardware store might be able to help
     
  3. May 4, 2020 at 3:17 PM
    #3
    Jim Beam

    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    Yeah, I would suggest contacting a bumper manufacturer for that one. The best way to mount a bumper of any kind of a CJ is to transfer the load from the oem CJ bumperette mounts to the frame.
     
  4. May 4, 2020 at 3:30 PM
    #4
    unclejohnny75

    unclejohnny75 [OP] Member

    Joined:
    May 4, 2020
    Member:
    #4617
    Messages:
    6
    Gender:
    Male
    First Name:
    John
    Vehicle:
    1981 CJ7
    There are 8 bolts that connect the bumper to the jeep horizontally. I'm asking about the two bolts that mount the bumper from the bottom. Per the instructions the stock bumper had ten bolts holding it together also. These two bolts appear to screw directly into threaded portions of the frame.
     
  5. May 11, 2020 at 9:19 AM
    #5
    SrdjanDV

    SrdjanDV Active Member

    Joined:
    May 6, 2020
    Member:
    #4627
    Messages:
    30
    Gender:
    Male
    First Name:
    Srdjan
    Vehicle:
    1995 Jeep YJ, olive drab, V8, chey drietrain.
    engine swap as well as the entire drivetrain, 35 inch tires, home made swing away tire carrier, warn winch and SPOA.
    If you are talking about this bolts..

    543576_236_full.jpg those bolts are 7/16 -14 on my 95 YJ
     
    aggrex likes this.
  6. May 11, 2020 at 9:29 AM
    #6
    unclejohnny75

    unclejohnny75 [OP] Member

    Joined:
    May 4, 2020
    Member:
    #4617
    Messages:
    6
    Gender:
    Male
    First Name:
    John
    Vehicle:
    1981 CJ7
    Those are the bolts in question, but funny story...I went to my local fastener place, and we realized the threads are stripped out on one side, so a drillbit and a tap are going to be in my future. Thanks for the info.
     
  7. May 12, 2020 at 6:39 AM
    #7
    LYFZGOOD

    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    929
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Check with Napa you can purchase what’s called a Heli coil set you can buy them in various different sizes and drill out the old threads and put in new ones they come with a drill bit a tap and a tool to install the new threads. Good luck
     
    aggrex likes this.
  8. May 12, 2020 at 4:00 PM
    #8
    Jim Beam

    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    Yeah, those are 7/16-14 bolts going into the rear shackle hangars. A heli-coil should work just fine.
    Edit: Try and get some stainless ones.
     
    Last edited: May 12, 2020
To Top