1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2005 5.7 HEMI Transfer case/Viscous coupler Question

Discussion in 'Grand Cherokee' started by tsims777, Jan 15, 2022.

  1. Jan 15, 2022 at 5:35 PM
    #1
    tsims777

    tsims777 [OP] New Member

    Joined:
    Jan 15, 2022
    Member:
    #6202
    Messages:
    1
    Gender:
    Male
    Looking for possible causes for an issue with a 2005 5.7 HEMI. Several general mechanics have checked out the lift kit that is on it, ball joints, etc.
    Occasionally, when vehicle shifts between the two highest gears, it wants to jerk to the left. Basically when I accelerate to pass/go up a steep grade, etc. it will pull hard to left and then feels jumpy between gears. It doesn't do it all the time. It feels like 3 wheels are responding and one isn't.
    Could this possibly be caused by a bad viscous coupler. Any help would be appreciated.
     
To Top