1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Selling a 1982 Jeep CJ 7 4x4 I-6

Discussion in 'Jeep CJ Marketplace' started by zamecnik247, Feb 12, 2022.

  1. Feb 12, 2022 at 1:18 PM
    #1
    zamecnik247

    zamecnik247 [OP] New Member

    Joined:
    Feb 12, 2022
    Member:
    #6258
    Messages:
    2
    Gender:
    Male
    First Name:
    Scott
    Racine, Wisconsin
    Vehicle:
    Jeep CJ7
    4.6L Stroker I-6
    Hello,
    I am selling my 1982 Jeep CJ 4x4 I-6. I am relocating and don't have time to fix or there is no place to wheel it. It still has the Dana 35 Fr open differential 4:10 and AMC 20 R with a lunchbox locker 4:10. The transfer case is a 300 that I rebuilt and added twin shifters. The transmission is Torqueflite 727, I had transmission update kit put in. I added cable shifting and kit down. The motor is a AMC / Chrysler 4.6 L stroker. The engine is full roller valve terrain (Cam, lifters, rockers). It's OBD 1 has the 2004 intake and Ford mustang 5.0 injectors. The cold air intake is connected to the vent in front of the windshield. The radiator is new with 2 electric fans. They turn on with a thermostat or by switch. The fuel pump is external from Autozone and it needs to be replaced and the fuel is varnished and will need to be removed. The body is fiberglass, I have added YJ fender flares and the directionals and taillights are Led. The doors and tailgate are steel from a Jeep from Cali, the windshield fame is a new aftermarket. The rear liftgate works but could be replaced. The seats and rollbar are from a YJ. The battery is shot and will need replacing. The frame was sectioned from 2 separate frames before I bought it. Its still the old school 7 stack 4 inch leaf spring suspension. The side bars are rotten and has a nice front winch bumper. The steering box is from a H1 hummer. It will need tires, the brakes will have to be gone through and a leaky grease seal in the rear diff. $3000 obo / Racine, WI

    IMG_1664.jpg
    IMG_1665.jpg
    IMG_1666.jpg
    IMG_1668.jpg
    IMG_1670.jpg
    IMG_1675.jpg
    IMG_1676.jpg
     
    Last edited: Feb 13, 2022
  2. Feb 12, 2022 at 7:23 PM
    #2
    LYFZGOOD

    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    932
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Location location location
     
    aggrex likes this.
  3. Feb 12, 2022 at 9:08 PM
    #3
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,840
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    My guess is WISCONSIN....only 800 miles away.....nice project for someone
     
    LYFZGOOD[QUOTED] likes this.
  4. Feb 13, 2022 at 6:27 AM
    #4
    zamecnik247

    zamecnik247 [OP] New Member

    Joined:
    Feb 12, 2022
    Member:
    #6258
    Messages:
    2
    Gender:
    Male
    First Name:
    Scott
    Racine, Wisconsin
    Vehicle:
    Jeep CJ7
    4.6L Stroker I-6
    Sorry I added the location to my initial post after I posted. LOL Racine, WI
     
    aggrex likes this.
To Top