1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2007 Wrangler JK issues.

Discussion in 'Wrangler JK (2007-2017)' started by Jeffs07, Jun 27, 2025 at 2:47 PM.

  1. Jun 27, 2025 at 2:47 PM
    #1
    Jeffs07

    Jeffs07 [OP] New Member

    Joined:
    Friday
    Member:
    #9527
    Messages:
    1
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    2007 4 Door Jeep Wrangler Jk
    Lots
    I have a 2007 four-door Jeep that won’t start. When you turn the key, nothing. The PCM board has been replaced new battery still nothing. When you short across the starter, the spindle turns, but the cog does not kick in. The only way to make the starter spin is to Short across it. When you turn the key Nothing happens as far as the starter. All the other electronics seem to work fine. The motor is not seized. Could it possibly be ignition switch, or neutral bypass switch… Any thoughts. Thanks Jeff
     
To Top