1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2004 WJ Grand Cherokee Laredo Power WIndow / Door Locks / Remote

Discussion in 'Grand Cherokee' started by RANDK88, May 29, 2025.

  1. May 29, 2025 at 7:15 PM
    #1
    RANDK88

    RANDK88 [OP] New Member

    Joined:
    May 29, 2025
    Member:
    #9480
    Messages:
    1
    Gender:
    Male
    First Name:
    Ron
    Vehicle:
    2004 Jeep Grand Cherokee WJ Laredo / 2018 Jeep Grand Cherokee Laredo
    2004 - Levelers / 2018 Lift Wheels, Tires, Side Steps
    I have a 2004 WJ Grand Cherokee Laredo. Had issues with both the driver side and passenger side power window/door lock modules.

    I replace both modules and programmed the remotes.

    Here is my problem:
    Driver Side - All controls work properly (front & back windows and all door locks).
    Passenger Side - Front widow works properly. However, the door lock will lock and unlock all doors and lift gate, except the driver's door. The remote will also lock/unlock all doors except the driver's door.

    Is there a wire that controls the driver's door lock, from the passenger side, that is different from the one from the passenger side to the driver's side? Is it the same wire that controls the passenger side door lock from the driver side? If there is a specific wire from the passenger module, can anyone tell me which one specifically? Or, do I have a bad passenger side module?

    Any help is greatly appreciated. I am really frustrated with it and running out of ideas.
     
To Top