1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

found an old jeep

Discussion in 'General Jeep Discussion' started by foundanoldy, Jul 12, 2019 at 5:17 PM.

  1. Jul 12, 2019 at 5:17 PM
    #1
    foundanoldy

    foundanoldy [OP] New Member

    Joined:
    Friday
    Member:
    #3509
    Messages:
    2
    Gender:
    Male
    i found a old willys jeep cj2a with the split windshield in an old salvage yard frame is solid drivetrain engine everything still original the tub looks fairly solid its a little rough its been sitting for decades i reached through the years of leafs and crud and the floor pans feel like they are ok of course it needs gone through but its five hundred bucks delivered does this sound like an ok deal
     
  2. Jul 12, 2019 at 5:35 PM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    2,629
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @foundanoldy ...pics will make this find more exciting.
     
  3. Jul 12, 2019 at 5:55 PM
    #3
    foundanoldy

    foundanoldy [OP] New Member

    Joined:
    Friday
    Member:
    #3509
    Messages:
    2
    Gender:
    Male
    i dont have a phone to take pictures its rough like i said it been in a salvage yard for decades the flat head motor will hopefully be buildable but the tranny shifted in and out of gear its got three shifters i guess one is for an underdrive to reduce the gear ratio like i said its rough but i am sure it can be brounght back to life i think he said it was a 41 or maybe 47 it has the original pull bar on the front the spots for a shovel and axe are on drivers side i havent gotten it to the shop yet to get a real good look but at five hundred delivered i figure i cant really go wrong do you
     
    JKBob 25 likes this.
  4. Jul 12, 2019 at 6:53 PM
    #4
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    2,629
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Sounds like a nice jeep project. Hard to find jeeps of that era are always facinating. I'm sure pics will be forth coming as you document your build.
     
  5. Jul 12, 2019 at 7:41 PM
    #5
    JKBob 25

    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,279
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    2" Superlift kit. 315/ 70/17.
    500 bucks delivered . I'd buy it. I might not ever do anything with it based on the fact, parts might be a bitch to find. But I'm sure I could do something with it.

    Ohh sorry. Welcome to the forum dude. @foundanoldy . As mentioned. Definitely post up some jeep porn...pics.:jeepwave:
     
To Top