1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Installing JCR flat tube fenders on my 95 YJ

Discussion in 'Wrangler YJ Builds (1986-1995)' started by USMC Lifer, May 23, 2020.

  1. May 23, 2020 at 9:23 AM
    #1
    USMC Lifer

    #1
    USMC Lifer [OP] Member

    Joined:
    May 19, 2019
    Member:
    #3222
    Messages:
    12
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    1995 YJ
    Pro Comp 3/5 in spring lift, new Novak AX15 5sp, SYE from Adams, All new brakes from Power Stop, All new front end parts ie. ball joint tie rode ends
    I am hoping for some ideas or just straight talk for my issue with these fenders. The original fenders are still with me but I bought a set of JCR tube fenders with inners. The install went pretty smooth with adjustments as you would expect. My problems are re-installing the coolant overflow and the windshield reservoir so they don't interfere with the vacuum canister or the PCM. All of these were originally mounted on the drives side firewall and the inner fender. I have the PCM and vacuum canister back in their original positions. Is there anyone out there that has done this before and has any advice on how/where to mount the reservoirs or even maybe move the PCM and vacuum canister?
     
    USMC Lifer, May 23, 2020
    #1
  2. May 24, 2020 at 9:55 AM
    #2
    USMC Lifer

    #2
    USMC Lifer [OP] Member

    Joined:
    May 19, 2019
    Member:
    #3222
    Messages:
    12
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    1995 YJ
    Pro Comp 3/5 in spring lift, new Novak AX15 5sp, SYE from Adams, All new brakes from Power Stop, All new front end parts ie. ball joint tie rode ends
    Still struggling. My power steering reservoir is a remote bottle beside the radiator. Anyone ever heard of changing to a pump with a reservoir on it? If I can do this I can mount the coolant reservoir beside the radiator. Then the windshield reservoir will fit in its (close to) it's original position. This would solve my problem I think. Any input on this would be greatly appreciated.
     
    USMC Lifer, May 24, 2020
    #2
Register FREE to Reply!
To Top