1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1994 Fuel Line

Discussion in 'Wrangler YJ (1986-1995)' started by BlueLM, May 15, 2017.

  1. May 15, 2017 at 6:26 PM
    #1
    BlueLM

    BlueLM [OP] New Member

    Joined:
    Apr 24, 2017
    Member:
    #1387
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1994 wrangler
    none-stock
    hello, I have a 1994 Wrangler 4.0, and cannot find a replacement fuel line anywhere. Any ideas, its leaking at both ends.
     
  2. May 15, 2017 at 6:36 PM
    #2
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
  3. May 16, 2017 at 7:52 PM
    #3
    BlueLM

    BlueLM [OP] New Member

    Joined:
    Apr 24, 2017
    Member:
    #1387
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1994 wrangler
    none-stock
    Ok am only posting for future problems regarding same issue. I have 4.0 1994 wrangler. They discontinued the fuel supply line from frame rail to engine (cant buy new one). I found a universal replacement kit from Moparpartsoverstock.com. I searched everywhere for part, this is only part I found that did not have to be made by someone, or have jeep sent out for repair, so I hope this helps someone in future. Ohhh, call 1800 number on website because part number was hard to locate on site.
     

Products Discussed in

To Top