1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Diagnose no crank no start. 2013 JK

Discussion in 'Wrangler JK (2007-2017)' started by blackstronaut moondick, Nov 18, 2020 at 9:06 PM.

  1. Nov 18, 2020 at 9:06 PM
    #1
    blackstronaut moondick

    blackstronaut moondick [OP] New Member

    Joined:
    Wednesday
    Member:
    #5248
    Messages:
    1
    Gender:
    Male
    Not starting or cranking. Just replaced battery a week ago cuz the cell was blown. Went out of town three days. Came back and it started fine first try. Stalled her reversing up a hill to get out of the parking spot. Then she wouldn't start. Checked battery and read was 12.3 volts so tried jump starting. Not cranking. No joy. I rolled it down the hill and started it by slipping into second. So it’s not the engine. Thank god. Only thing make me think it’s something else is the recent battery issues and the new battery reading slightly low. It’s reading 12.46 after the jump but still whirring and not cranking.

    the noise its making sounds like the starter is whirring:
    https://www.dropbox.com/t/lICudZG3xftHj1jB
     

Products Discussed in

To Top