1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Engine swap

Discussion in 'Cherokee Builds' started by Shunnel, Mar 9, 2017.

  1. Mar 9, 2017 at 5:39 PM
    #1
    Shunnel

    Shunnel [OP] New Member

    Joined:
    Mar 9, 2017
    Member:
    #1119
    Messages:
    1
    Gender:
    Female
    Vehicle:
    2000 Rhd Cherokee
    Engine block from 1993 Grand Cherokee
    I am currently trying to get my postal rhd Cherokee 4L on the road. I purchased it with a blown engine, pieces of the piston coming out the side of the block, and the oil pan. I have a block out of a 1993 grand Cherokee that was running when I pulled it I am planning on putting in. I need to use the original head from the 2000 as the fuel injection from these years did vary. I was wondering if there was anything I also needed to change out to make these two compatible.
     
  2. Mar 9, 2017 at 7:20 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,048
    Gender:
    Male
    Welcome! Cant be much help, but hopefully someone chimes in soon.
     
To Top