1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

How do I connect my stereo to my sound bar

Discussion in 'Audio & Video' started by Zacho13, Feb 15, 2017.

  1. Feb 15, 2017 at 8:54 PM
    #1
    Zacho13

    Zacho13 [OP] Member

    Joined:
    Feb 15, 2017
    Member:
    #984
    Messages:
    8
    Gender:
    Male
    First Name:
    Zach
    Freehold New Jersey
    Vehicle:
    1997 Green Wrangler Sport
    4 inch lift 50" Lightbar 2 lightbar pods 8500 lbs winch on aftermarket bumper 33" all terrain wheels
    I have a VDP sound bar and a aftermarket Sony stereo but the stereo is only hooked up to the normal jeep speakers which are blown. How do I connect the stereo to the sound bar?
     
  2. Feb 16, 2017 at 6:52 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    3,027
    Gender:
    Male
    Welcome! Run the wires that go to the factory speakers, to the sound bar.
     
  3. Feb 16, 2017 at 7:06 AM
    #3
    Zacho13

    Zacho13 [OP] Member

    Joined:
    Feb 15, 2017
    Member:
    #984
    Messages:
    8
    Gender:
    Male
    First Name:
    Zach
    Freehold New Jersey
    Vehicle:
    1997 Green Wrangler Sport
    4 inch lift 50" Lightbar 2 lightbar pods 8500 lbs winch on aftermarket bumper 33" all terrain wheels
    Well most of it is already wired all I know is there is a blue wire behind the stereo that's not connected to anything
     
  4. Feb 16, 2017 at 9:13 AM
    #4
    OFFGRID

    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    1,740
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    Blue wire on the back of the sony controls a motorized antenna to go up and down when the radio is on and off. Could also be the remote power to turn on the amps if you have any. It should be labeled: Ant = antenna, Rem = Remote/switched power to amps.
     
    Last edited: Feb 16, 2017
    chris4x4 likes this.
  5. Feb 16, 2017 at 6:21 PM
    #5
    Zacho13

    Zacho13 [OP] Member

    Joined:
    Feb 15, 2017
    Member:
    #984
    Messages:
    8
    Gender:
    Male
    First Name:
    Zach
    Freehold New Jersey
    Vehicle:
    1997 Green Wrangler Sport
    4 inch lift 50" Lightbar 2 lightbar pods 8500 lbs winch on aftermarket bumper 33" all terrain wheels
    Ok I will keep trying
     

Products Discussed in

To Top