1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Jeep Wrangler not running

Discussion in 'Wrangler JK (2007-2017)' started by Pinkflower101, Nov 29, 2023.

  1. Nov 29, 2023 at 6:20 AM
    #1
    Pinkflower101

    Pinkflower101 [OP] New Member

    Joined:
    Nov 29, 2023
    Member:
    #8393
    Messages:
    1
    Gender:
    Female
    Vehicle:
    2011 jeep wrangler unlimited sport
    I bought a 2011 keep wrangler unlimited sport and it ran fine for about a week then as I was backing out of my driveway it had no power I shut it off then it would crank but not start. We have replaced the tipm twice the first time we did it ran for like a minute then wouldn’t run but the second one we got it actually started and ran but it was misfiring, coil pack because it was melted and cracked then the one we replaced cracked again and we replaced again, camshaft sensor and crankshaft sensor. I went to have someone fix the brakes and as they were driving it stopped running. They hooked it up to a code reader and it gave the following ones: U0401,P0688, P2305,P0057,P0037,P0051,P0031,P0300Has anyone had this happen to them or have any ideas what could be wrong?
     

Products Discussed in

To Top