1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Code reader Muffler Best GPS for your rig Where to mount aux light rocker switches? Fuel injector Soft top recommendations

Lift for my TJ

Discussion in 'Wrangler TJ (1996-2006)' started by BlakeG96, Mar 22, 2017.

  1. Mar 22, 2017 at 10:07 PM
    #1
    BlakeG96

    #1
    BlakeG96 [OP] Member

    Joined:
    Mar 22, 2017
    Member:
    #1198
    Messages:
    24
    Gender:
    Male
    First Name:
    Blake
    Rancho Cucamonga CA
    Vehicle:
    2004 Jeep Wrangler X
    3 inch teraflex lift kit 33-10.50.15 BFG Ko2 Light pods on A-Pillar
    I'm looking to run some 33inch tires. I'm not to sure if I should do some 10.5 or some 12.5, but I do know I want a 3inch lift.

    I've read some good things about the 3.5 inch Teraflex lift kits. Anyone care to give their opinion?

    Screen Shot 2017-03-22 at 4.52.04 PM.jpg
     
    BlakeG96, Mar 22, 2017
    #1
  2. Mar 23, 2017 at 8:38 AM
    #2
    cannonball

    #2
    cannonball Member

    Joined:
    Jul 25, 2016
    Member:
    #11
    Messages:
    22
    Gender:
    Male
    Vehicle:
    2004 TJ
    Metalcloak seems to be the most recommended lately
     
    cannonball, Mar 23, 2017
    #2
  3. Mar 23, 2017 at 9:25 AM
    #3
    OFFGRID

    #3
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    Can't go wrong with teraflex. My favorite brand, but there are many out there. I like teraflex because you can build on it; i.e. later when you have a little more money to spend you can order their adjustable control arms and push your axle back out to where it should be after lifting and even a little further if you want like up to 1.5 inches front and back giving you 3 more inches of stretch.
     
    OFFGRID, Mar 23, 2017
    #3
Register FREE to Reply!
To Top