1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

No Start, Check Engine light on very faint, No fuel Pressure at test port. My Daughters Jeep.

Discussion in 'Wrangler YJ (1986-1995)' started by guy 1009, Jul 26, 2022.

  1. Jul 26, 2022 at 7:27 PM
    guy 1009

    guy 1009 [OP] New Member

    Jul 26, 2022
    Ok guys, I'm just Dad, My daughter's 1995 Wrangler with 4.0L doesn't want to run. Last time it ran for 15 seconds, died. Now starts for 2-3 seconds and dies. The fuel rail has no pressure at the test port. During cranking I will get a flow of fuel. Fuel pump is 3 months old.
    The strange thing is the Check Engine light comes on with the key on, goes off, but is still illuminated very faintly. Just found out how to access OBD I. I don't know if there are any.
    I have heard about the capacitors in the ECM problem, and I wonder if that is why the Check Engine light is very faint after 5 seconds of Key On?

    Any ideas, information, etc. would be appreciated. Being Dad, this is probably on my dime.

To Top