1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Replacing wiper motor with different color wires.

Discussion in 'Cherokee' started by booger3399, Feb 5, 2017.

  1. Feb 5, 2017 at 10:32 AM
    #1
    booger3399

    booger3399 [OP] New Member

    Joined:
    Feb 5, 2017
    Member:
    #923
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1987 Jeep Cherokee 4.0
    I recently had to replace the wiper motor on my 87 Cherokee. I wanted to save a little money and found one at a local u-pull-it. It came off a newer model and had the 5 wires, but some different colors. mine had a round connector, the one I found had an oval connector. so I had to do a little splicing to use the connector off the old one. Problem was the different colored wires. I tried to consult the internet, but with no solution. I was having a real problem finding any information that would show me what each color wire would do. So I eventually resorted to trial and error. I did finally get it connected right. All working:hi,lo, intermittent.
    I would like to share the way it was connected for anyone else running into this problem.

    Round connector: Oval connector:
    Red - Red
    Black - Black
    White - Brown
    Blue - Green
    Gray - Blue
     

Products Discussed in

To Top