1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Timing question

Discussion in 'Cherokee' started by T2be, Aug 9, 2017.

  1. Aug 9, 2017 at 6:03 AM
    #1
    T2be

    T2be [OP] New Member

    Joined:
    Aug 9, 2017
    Member:
    #1766
    Messages:
    1
    Gender:
    Male
    Vehicle:
    Jeep grand cherokee
    Hello, I am new so I will post this question in dire need of help setting the timing on my 2000 grand cherokee. I set the bottom timing gear at 6 the idler at 12, and both cams at 12. When I put the cover and dampner on and put the dampner at the TDC mark the cams are both at 2 o'clock position. The shop manual says that they should be at either 12 or 6 o'clock. I don't see the bottom timing gear will be at 6 if I have the dampner set at the TDC mark.
     
  2. Aug 9, 2017 at 8:17 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,048
    Gender:
    Male
    Welcome to the site!
     
    T2be [OP] likes this.
To Top