1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tracking down the famous ABS/Traction lights

Discussion in 'Wrangler JK (2007-2017)' started by '14JKU, Feb 22, 2021 at 8:45 AM.

  1. Feb 22, 2021 at 8:45 AM
    #1
    '14JKU

    '14JKU [OP] New Member

    Joined:
    Monday
    Member:
    #5452
    Messages:
    1
    Gender:
    Male
    First Name:
    D
    Vehicle:
    2014 JKU
    lights and tires
    Howdy,
    gravel road, slowed to go over some pot-holes, the christmas tree effect on the dash and the ABS and Traction lights came on, probably all of 15mph.
    Now no cruise, or ABS, hill start flashes, ABS and ECS are always lit.
    Went to auto zone to read the codes, dip-sht told me they don't have the code reader for ABS, (Have to ask for the "loaner", found that out from reading the forums after doing the wrong side) replaced the right front because the TPMS is out on the right front.
    lights still on, went back and got the good code reader, CODES:C2102, C2100, C100A.
    so replaced the front left sensor and lights are still on. Taking it back to read the codes again after I check the wheel bearing on the front left.
    Anyone else with these same sets of circumstances? If the wiring between the sensor and the brain is bad, how do you check/fix that? THIA
     

Products Discussed in

To Top