1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Woven ground wire

Discussion in 'Cherokee' started by fireman, Aug 9, 2016.

  1. Aug 9, 2016 at 8:52 AM
    #1
    fireman

    fireman [OP] New Member

    Joined:
    Aug 9, 2016
    Member:
    #68
    Messages:
    1
    Gender:
    Male
    First Name:
    Thomas
    Vehicle:
    1999 Jeep grand Cherokee 4.7 ltr.
    none
    On my 1999 Jeep Grand Cherokee there is a woven ground wire that comes from the passenger side of the fire wall. It splits into two wires and looks like it goes to the left and right side of the motor. Both wires have eyelets. My question is were do they go? Valve cover, mounting tab for ing. wire?
     
  2. Aug 9, 2016 at 9:27 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    3,182
    Gender:
    Male
    Welcome! Let me know if this helps:



    upload_2016-8-9_9-27-48.jpg
     
    Bob likes this.
  3. Aug 10, 2016 at 11:33 AM
    #3
    JeepAndrew

    JeepAndrew Active Member

    Joined:
    Jul 24, 2016
    Member:
    #6
    Messages:
    36
    Gender:
    Male
    Vehicle:
    '93YJ/'97XJ
    What motor? If it's the 4.0 driver side goes to the stud on the rear head bolt and passenger should go down to a grounding point on the block just under the head. Valve cover bolts should be your last choice since they aren't the best ground.
     
To Top